Individual marker lights
35,90 €
incl. 19% VAT plus Shipping
Individual marker lights, scale 1/16 to 1/14.5, 7.2 to 12 volts, made of flexible rubber, white and red LEDs, with 10 cm of enameled wire, dimensions: Length 18 mm, height 9 mm, width 5 mm, base 9 x 4 mm, the light is attached using superglue, contents: 1 right-hand, 1 left-hand contour light, instructions
Warning! Not suitable for children under 14 years of age.
item code: 191520
In stock
Individual marker lights, scale 1/16 to 1/14.5, 7.2 to 12 volts, made of flexible rubber, white and red LEDs, with 10 cm of enameled wire, dimensions: Length 18 mm, height 9 mm, width 5 mm, base 9 x 4 mm, the light is attached using superglue, contents: 1 right-hand, 1 left-hand contour light, instructions
Warning! Not suitable for children under 14 years of age.
| Weight | 0,005 kg |
|---|---|
| Dimensions | 13 × 7 × 0,5 cm |
You must be logged in to post a review.
You may also like…
3-chamber tail light with lighting board
incl. 19% VAT
plus Shipping
3-chamber tail light with lighting board, scale 1/14, for 7,2 Volt, for 12 Volt use supplied diode, light functions: Rear light, brake light and turn signal, black perforated mask for LED - effect, cable length approx. 550mm, Ø of housing 11mm, height 7,5mm, fixing screw centered M2, content: 2 prefabricated housings with light inserts, circuit board and cable, 2x red glasses, 2x orange glasses, 2x perforated mask self-adhesive, 2x fixing screw, 1 diode at 12 Volt operating voltage
item code: 907679
Attention : Not suitable for the MFC from Tamiya
Attention. Not suitable for children under 14 years.
Related products
Servo bracket set steering axle GH
incl. 19% VAT
plus Shipping
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907698
1/14 Steered low loader axle
incl. 19% VAT
plus Shipping
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 907699
Ramp set Low loader GH TU4
incl. 19% VAT
plus Shipping
Ramp set Low loader GH TU4, scale 1/14, one-piece ramps with wooden application for self-construction or as a spare part suitable for 907400 Goldhofer TU4 low loader trailer 4-axle, all parts required for assembly are included in the scope of delivery, contents: 2 ramps, mounting hardware, wooden support, assembly instructions
Attention! Not suitable for children under 14 years.
item code: 907628
Reviews
There are no reviews yet.