TRANSFERCASE FOR 4WD DRIVE 1:1
107,80 €
incl. 19% VAT plus Shipping
Transfer case, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 1: 1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Item code 251190
In stock
Transfer case, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 1: 1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
| Weight | 1 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
You must be logged in to post a review.
Related products
1/8 transfer case selectable, reduction ratio 1:1
incl. 19% VAT
plus Shipping
Transfer case selectable, scale 1/8, reduction ratio 1:1, front axle selectable via servo, milled aluminium housing, hardened steel gears, multiple ball bearings, input and output shafts with hexagon 5mm, shift shaft and shift rod made of 3mm steel, mounting bracket made of aluminium, weight: 360g, dim. Housing (wxhxl) 69x44x50mm, total length with hexagonal shafts 73mm, Contents: 1 transfer case with bracket, shift rod, ball heads and fixing screws
item code: 216130
Caution! Not suitable for children under 14 years of age.
Transfer case 4WD 2:1
incl. 19% VAT
plus Shipping
Transfer case 4WD, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 2:1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Item code 251195
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Reviews
There are no reviews yet.