Transfer gear box, shiftable
115,50 €
incl. 19% VAT plus Shipping
Transfer gear box, shiftable, scale 1:8, perfect for off-road-driving, the front axle can be switching on or off with a servo, speed reduction 3:1, housing from aluminum, pinion`s from steel, hardened, with ball bearing, holder from aluminum
Item code: 216933
In stock
Transfer gear box, shiftable, scale 1:8, perfect for off-road-driving, the front axle can be switching on or off with a servo, speed reduction 3:1, housing from aluminum, pinion`s from steel, hardened, with ball bearing, holder from aluminum
| Weight | 1 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
You must be logged in to post a review.
Related products
Alum. Transfer-gearbox Tipper 6×6
incl. 19% VAT
plus Shipping
Alum. Transfer-gearbox Tipper 6x6, Scale 1/14, fits the Tamiya Arocs tipper, housing made of machined aluminum, 6 ball bearings, the reduction ratio is 3: 1, all hardened, contents: 1 transfer case, 3 gimbals, 2 blocks, 2 bushes, fixing screws
item code: 907610
Warning! Not suitable for children under 14 years.
Four-wheel transfer case 2:1 with self-locking differential
incl. 19% VAT
plus Shipping
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251205
Warning! Not suitable for children under 14 years.
TRANSFERCASE FOR 4WD DRIVE 1:1
incl. 19% VAT
plus Shipping
Transfer case, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 1: 1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Item code 251190
Transfercase for 4-wheel drive
incl. 19% VAT
plus Shipping
Transfercase for 4-wheel drive, support set, the front axle can be connect with a servo, the output shaft have a diameter from 5mm and be feature with 4 ball bearings, speed reduction 2:1, this set is suitable for the 3-gear with item code 251100, instruction and fixing parts are included
Item code 251180
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Reviews
There are no reviews yet.