Stanchion Trailer II
489,99 €
incl. 19% VAT plus Shipping
Stanchion Trailer II
3-axle Stanchion Trailer for long log transports and similar applications. Fits to various Tamiya Trucks.
item code: 907082
Out of stock
Stanchion Trailer II
3-axle Stanchion Trailer for long log transports and similar applications. Fits to various Tamiya Trucks.
The kit is equipped as follows:
complete frame with protective side bars and king pins · height adjustable platform supports · 3 axles with true to original air suspension dummies · twelvefold ball raced · platform tyres and rims with mudguards · spare wheel holders with spare wheel · underride guard on both sides · bumper with rubber buffers, 7-chamber tail lights and number plate holders work optionally with lights and stanchions made from aluminium
Technical Data:
Length: 990 mm, Width: 195mm, Height: 290mm, Weight: ca. 4kg
| Weight | 5 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
You must be logged in to post a review.
You may also like…
Related products
3-axle-stanchion-trailer 1/16
incl. 19% VAT
plus Shipping
3-axle-stanchion-trailer, 1/16 scale, kit, unpainted,
Product details:
- Rigid steel frame in sandwich construction (3 mm and 1 mm steel, laser-cut)
- SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
- Aluminium rims with wide Fulda Multitonn II tyres, ball-bearing mounted
- Mechanical trailer supports, pre-prepared for electric drive (gear motors not included in the kit)
- CNC-machined aluminium stanchions, infinitely adjustable, secured with clamps
- Solid aluminium front panel
- Steel underrun protection (left/right)
- Single-arm steel spare wheel holder with spare wheel
- Mud flaps
- Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 220 mm
Saddle height 90 – 100 mm
Weight 4,500 g
Warning! Not suitable for children under 14 years of age.
item code: 251060
3-axle-semi-trailer chassis 1/16
incl. 19% VAT
plus Shipping
3-axle-semi-trailer chassis, 1/16 scale, kit, unpainted,
Ideal as a base for your own projects and ideas.
Product details:
Rigid steel frame in sandwich construction (3 mm and 1 mm steel, laser-cut)
SAF axle suspension with dummy air springs, optionally with +8 mm lift (included)
Aluminium rims with Fulda Multitonn II wide tyres, ball-bearing mounted
Mechanical trailer supports, pre-prepared for electric drive (gear motors not included in the kit)
Steel underrun protection (left/right)
Single-arm steel spare wheel holder with spare wheel
Mud flaps
Decal sheet
Dimensions:
Length 955 mm, width 173 mm, height 90 mm
Saddle height 90 – 100 mm
Weight 3,500 g
Warning! Not suitable for children under 14 years of age.
item Code: 251040
2-axle boxed trailer
incl. 19% VAT
plus Shipping
2-axle boxed trailer, scale 1/14, suitable for Volvo FH16 (56360), metal kit
Product details:
Torsion-resistant steel frame in sandwich construction
Frame made of 3 and 1 mm sheet steel, laser-cut and CNC-bent
Steel sheet bogie in sandwich construction
Bearing bogie (adjustable) with sliding pads for easy manoeuvring
Drawbar (one-piece) made of fibre-reinforced plastic with chequer plate application
The drawbar is held in place by two tension springs for easier coupling
Coupling height 75 mm
Box body made of CNC-milled aluminium parts
Plastic side panels screwed on in sandwich look
Loading door locking with magnets
Aluminium door hinges (270° opening angle)
Ball-bearing chrome rims with wide tyres
Solid steel underride guard (left/right)
Detailed semi-trailer axles with dummy air springs, optionally with + 8 mm lift (kit contains both versions with/without lift)
Mudguards with splash guards
Bumper mud flap set
CNC-milled aluminium rear bumper
Decor set, detailed assembly instructions
Dimensions: LxWxH: 545 x 195 x 290 mm
Total weight: 4,800 g
Warning! Not suitable for children under 14 years of age.
item code: 907731
3-axle box trailer Ver.III white
incl. 19% VAT
plus Shipping
3-axle box trailer Ver.III white, scale 1/14, torsion-resistant steel frame (3 and 1 mm steel, lasercut) screwed together in sandwich construction, underride guard and spare wheel holder made of steel, wide chrome rims with ball bearings and wide tyres, new axle suspension optionally with height adjustment +8 mm (included), aluminium trailer supports adjustable (manual), aluminium bumper incl. 7-chamber rear lights, semi-circular mudguards, aluminium box body with plastic side panels in sandwich look (screwed together), aluminium door hinges (270° opening angle), loading door locking with magnets, the kit is supplied unpainted, assembly instructions, decal sheet
Dimensions: length approx. 980 mm, width approx. 195 mm, height approx. 300 mm, weight 7,400 g
item code: 907792
Caution! Not suitable for children under 14 years.
3-AXLE STANCHION TRAILER III, NEW SUSP.
incl. 19% VAT
plus Shipping
3-AXLE STANCHION TRAILER III, NEW SUSP. The new 3-axle stanchion trailer from CARSON for transporting logs or similar long loads is a perfect addition to the TAMIYA tractors. The basis for the trailer is a newly developed torsion-resistant frame (sandwich construction) made of 3 and 1 mm laser-cut sheet steel. A new suspension is also included, this can optionally be raised by 8 mm and thus balances the level of the saddle to a higher tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. Depending on the load and requirements, the six aluminum stanchions can be steplessly positioned on the chassis or removed. These are loosened or fixed using the two countersunk grub screws. A massive steel front wall secures the load to the front of the tractor. Two work lights can be optionally mounted on the front wall and also on the rear frame, the fixings are already provided. A stable underrun protection and a spare wheel holder made of steel complete the detailing of the model.
Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid steel front wall
- Stakes (one-piece) milled from solid aluminum
- The stanchion bracket can be loosened using two grub screws and repositioned or removed as required.
- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm - Solid underrun protection made of steel (left / right)
- One-arm spare wheel holder made of steel with spare wheel
- Chrome rims with ball bearings and wide off-road tires
- 7-chamber taillights and license plate holder included
- Decor set, detailed building instructions
Dimensions: LxWxH: 980 x 190 x 310 mm, weight: 5,100 g
Attention! Not suitable for children under 14 years.
item code: 907629
2-axle stanchion-trailer Riedler
incl. 19% VAT
plus Shipping
2-axle stake trailer Riedler
The 2-axle stanchion trailer from "Riedler Fahrzeugbau" reflects its attractive workmanship and appearance as in the original as well as in the model and makes the trailer an unmistakable companion on real roads, as well as in the model on the course.
In conjunction with the TAMIYA Volvo FH16 timber transporter, this articulated train becomes a workhorse and is in no way inferior to the original. The massive frame made of sheet steel in connection with the aluminum stake allow a payload of approx. 5,500g. So that the different lengths of wood also lie optimally on the stanchions, they can be moved and freely positioned on the chassis frame.
To refine the 2-axle stake trailer, an optional set (item no .: 907623, with spare wheel and holder, 2 compressed air tanks and a lashing set) is available.
For use on the TAMIYA Volvo FH16 tractor, the towing hitch with item no .: 907182 is required, the assembly is carried out on the existing frame end crossmember.
Product details:
- 1:14 scale
- Torsionally stiff steel frame in sandwich construction
- Frame made of 3 and 1 mm steel sheet laser cut
and CNC bent
- Turntable made of sheet steel in sandwich construction
- Stored turntable (adjustable) with sliding pad
for easy maneuvering
- Drawbar (one-piece) made of fiber-reinforced plastic with
Checker plate application
- For easier attachment, the drawbar is attached to two
Tension springs held in the coupling height of 75 mm
- Posts (one piece) milled from solid aluminum material
- Post bracket can be loosened using two grub screws
be repositioned or removed as needed
become.
- Trailer axles with dummy air springs
- Ball-bearing chrome rims with wide tires
- Solid aluminum underride protection (left / right)
- Mudguard splash guard and bumper grille set
- CNC milled aluminum rear bumper
- 7-chamber taillights, license plate holder and
Work lights included
- Decor set
Dim .: LxWxH: 620 x 190 x 305 mm
Weight: 2,600g
- Optional Available: 907623 Accessory set for 2-axle Riedler stanchions
* Official Licensed by Ernst Riedler Fahrzeugbau- und Vertriebs.m.b.H
Attention! Not suitable for children under 14 years.
item code: 907622
Goldhofer TU4 flatbed trailer
incl. 19% VAT
plus Shipping
Goldhofer TU4 flatbed trailer, scale 1/14, kit, laser cut sheet steel, one-piece ramps (manually hinged and adjustable), bogie double ball bearing, axles leaf suspension with pendulum compensation, rear support manually adjustable, 7-chamber taillights, license plate holder, fender semicircular, 16-speed ball bearing wheels , Wood supports, spacers, underride protection, decals, building instructions
Dimensions: length 855mm, width 195mm, total height 265mm, height platform 75mm, weight 5.2kg
item code: 907400
Warning! Not suitable for children under 14 years.
Reviews
There are no reviews yet.