Bow holder middle part
6,00 €
incl. 19% VAT plus Shipping
Bow holder middle part, scale 1/14, made of plastic, suitable for the Carson curtains side trailer Art.No. 907005, 907080, 907235 and 907630, also ideally suited for self-built, dimensions: height 175mm, width 14mm, thickness 4mm, content: 1 bow holder middle part + 1 bracket
item code: 18330
Caution! Not suitable for children under 14 years of age.
In stock
Bow holder middle part, scale 1/14, made of plastic, suitable for the Carson curtains side trailer Art.No. 907005, 907080, 907235 and 907630, also ideally suited for self-built, dimensions: height 175mm, width 14mm, thickness 4mm, content: 1 bow holder middle part + 1 bracket
Caution! Not suitable for children under 14 years of age.
| Weight | 0,008 kg |
|---|---|
| Dimensions | 18 × 1 × 1 cm |
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
Bow holder end part left
incl. 19% VAT
plus Shipping
Bow holder end part left, scale 1/14, made of plastic, suitable for the Carson tarpaulin trailer item code 907005, 907080, 907235, 907630, also ideally suited for self-built, dimensions: height 175mm, width 7mm, thickness 4mm, content: 1 bow holder end part left
item code: 18331
Caution! Not suitable for children under 14 years of age.
Bow holder end part right
incl. 19% VAT
plus Shipping
Bow holder end part right, scale 1/14, made of plastic, suitable for the Carson tarpaulin trailer item code 907005, 907080, 907235, 907630, also ideally suited for self-built, dimensions: height 175mm, width 7mm, thickness 4mm, content: 1 bow holder end part right
item code: 18331
Caution! Not suitable for children under 14 years of age.
Related products
Pivoted bogie with axle
incl. 19% VAT
plus Shipping
Pivoted bogie with axle, scale 1/14, bogie for self-construction of trailer chassis, made of sheet steel, dimensions: length with drawbar 265mm, without 95mm, width with axle 165mm, without 100m, height 75mm, content: 1 set of steel parts for bogie, 1 plastic drawbar, 1 axle with dummy air springs, 1 pivot bearing with sliding washers, fastening material, instructions
Technical details:
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber
-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm- Trailer axle with dummy air suspensionDanger!
Attention! Not suitable for children under 14 years.
item code: 907625
Alum. mount (2) Tipper Fitting
incl. 19% VAT
plus Shipping
Alum. mount (2) Tipper Fitting, Scale 1/14, suitable for the Tamiya Arocs tipper, if the original battery compartment is removed, these holders are needed to attach the tank and exhaust. Content: 2 brackets (1x left and 1x right side), mounting screws, instructions
item code: 907615
Warning! Not suitable for children under 14 years
Tank bracket set
incl. 19% VAT
plus Shipping
Tank bracket set, suitable for the 3-axle Arocs (not suitable for the new tipper) and Actros from Tamiya, for attaching the tanks to the frame when the original battery compartment is removed. Contents: 2 aluminum brackets, mounting screws, instructions
item no: 907584
Warning! Not suitable for children under 14 years.
Windshield wiper – set
incl. 19% VAT
plus Shipping
Windshield wiper - set, scale 1/14, suitable for construction machines, buses, snowcats and so on, from plastic, included: a big doublearm-wiper and a small wiper, measure: small wiper: total length 42mm, wiper plade 31mm, arbor hole 2mm, big wiper: length from the wiper plade 60mm, from the arm 53mm, arbor hole 2mm, the set included 5 pices
Item code : 907369
Reviews
There are no reviews yet.