Semi-trailer axle with dummy air bag bellows, scale 1/14, axle shaft from aluminium, wheel bolt from steel, link and axle suspension from plastic, bellow dummy from rubber, total width with wheel bolt ca. 165mm, total height ca. 51mm, diameter of the wheel bolt 5mm, suitable for a width of frame from 96mm, Parts supplied with the kit include: axle shaft, wheel bolt´s, link, wheel suspension, dummy air bag bellows, fixing parts and construction manual.
Semi-trailer axle with dummy air bag bellows
72,99 €
incl. 19% VAT plus Shipping
Semi-trailer axle with dummy air bag bellows, scale 1/14, axle shaft from aluminium, wheel bolt from steel, link and axle suspension from plastic, bellow dummy fromrubber, total width with wheel bolt ca. 165mm, total height ca. 51mm, diameter of the wheel bolt 5mm, suitable for a width of frame from 96mm, Parts supplied with the kit include: axle shaft, wheel bolt´s, link, wheel suspension, dummy air bag bellows, fixing parts and construction manual.
Item code 907069
In stock
SKU:
907069
Categories: Truck Parts, Truck axles Scale 1/14
Description
Additional information
Weight |
1 kg |
---|---|
Lieferzeit |
approx: 2-3 days |
Reviews (0)
Be the first to review “Semi-trailer axle with dummy air bag bellows”
You must be logged in to post a review.
Shipping & Delivery
You may also like…
Semitrailer rim aluminum long hole
63,99 €
Semitrailer rim aluminum round hole
67,99 €
Semitrailer rim gray, wit seat for ball bearing
17,49 €
Wide base tyre Fulda Multitonn 2
26,49 €
Semi trailer rim chromed with seat for ball bearing
26,49 €
Related products
Pivoted bogie with axle
190,00 €
Pivoted bogie with axle, scale 1/14, bogie for self-construction of trailer chassis, made of sheet steel, dimensions: length with drawbar 265mm, without 95mm, width with axle 165mm, without 100m, height 75mm, content: 1 set of steel parts for bogie, 1 plastic drawbar, 1 axle with dummy air springs, 1 pivot bearing with sliding washers, fastening material, instructions
Technical details:
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber
-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm- Trailer axle with dummy air suspensionDanger!
Attention! Not suitable for children under 14 years.
item code: 907625
3-speed gearbox with transfer case and self-locking differential
317,90 €
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
item code: 251106
Warning! Not suitable for children under 14 years.
Four-wheel transfer case 2:1 with self-locking differential
137,50 €
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251205
Warning! Not suitable for children under 14 years.
Four-wheel transfer case 1:1 with self-locking differential
137,50 €
Four-wheel gear box transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 1: 1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251200
Warning! Not suitable for children under 14 years.
Steering rod
8,49 €
TRANSFERCASE FOR 4WD DRIVE 1:1
107,80 €
Transfer case, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 1: 1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Item code 251190
3-speed gearbox with transfer case
282,70 €
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105
Tamiya chassis frame profile
24,49 €
Reviews
There are no reviews yet.