Büssing 8000 S 13
479,00 €
incl. 19% VAT plus Shipping
Büssing 8000 S 13 as a new edition in scale 1:16
In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the “S” standing for standing engine and the “13” for the total displacement of 13 liters.
More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever.
Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50’s it was even allowed to couple two of these trailers. A real challenge as a captain of the road.
Technical details:
Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g.
The kit is supplied unpainted.
Scope of delivery:
– Frame made of aluminum with all drill – and threaded holes
– Ball bearing rear axle made of reinforced plastic with metal differential
– Front axle made of reinforced plastic
– Ball bearing Trilex – rims in front, in the rear Trilex – double rims
– original Fulda Coloss tires plus spare tires
– Leaf spring set front and rear made of spring steel
– driver’s cab consists of several plastic parts (ABS)
– flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor
– Interior, tank, air tank, splash flaps, hardware parts, exhaust etc.
– Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251000
In stock
Büssing 8000 S 13 as a new edition in scale 1:16
In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the “S” standing for standing engine and the “13” for the total displacement of 13 liters.
More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever.
Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50’s it was even allowed to couple two of these trailers. A real challenge as a captain of the road.
Technical details:
Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g.
The kit is supplied unpainted.
Scope of delivery:
– Frame made of aluminum with all drill – and threaded holes
– Ball bearing rear axle made of reinforced plastic with metal differential
– Front axle made of reinforced plastic
– Ball bearing Trilex – rims in front, in the rear Trilex – double rims
– original Fulda Coloss tires plus spare tires
– Leaf spring set front and rear made of spring steel
– driver’s cab consists of several plastic parts (ABS)
– flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor
– Interior, tank, air tank, splash flaps, hardware parts, exhaust etc.
– Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
| Weight | 2,54 kg |
|---|---|
| Dimensions | 60 × 21 × 8 cm |
Product safety
1 review for Büssing 8000 S 13
Show only reviews in English (0)
You must be logged in to post a review.
You may also like…
7,4V/1300mAh 20C LiPO battery
incl. 19% VAT
plus Shipping
7,4V/1300mAh 20C LiPO battery, T-Plug connector, suitable for the Büssing S8000 S13 ( item code: 251000 ) in connection with the lighting - set ( item code: 251002 ) or loader caterpillar LR 634 ( item code: 907111 ), content: 1 LIPO battery
item code: 608107
Attention. Not suitable for children under 14 years.
Servo CS-6
incl. 19% VAT
plus Shipping
Servo CS-6, power 6kg, low design, splash-proof, metal gear, JR - servo plug, cable approx. 250mm length, suitable for the Büssing 8000 S13 ( item code: 251000 ), content: 1 servo, 1 servo horn set
item Code: 502047
Attention. Not suitable for children under 14 years.
Achtung! Nicht für Kinder unter 14 Jahren geeignet.
2-axle trailer
incl. 19% VAT
plus Shipping
2-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50's it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.
A lighting set is optionally available for the 2-axle trailer (item no. 251004).
Technical details:
Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed
- Drop sides made of injection molded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tires
- Bracket with spare tire
- Platform with real wooden floor
- Tail lights with license plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251003
Drive set for the Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Drive set for the Büssing 8000 S 13, consisting of a 7.2 volt underfloor motor with planetary gearbox from the company Servonaut, the motor is pre-disturbed , has an idle speed of 470 rpm, the rated speed is 390 rpm, rated torque: 34.6 Ncm, the matching motor holder made of aluminum and the cardan shaft made of stainless steel with appropriate length compensation, mounting hardware and installation instructions. Contents: 1 gear motor, 1 motor holder, 1 cardan shaft, installation instructions
Caution. Not suitable for children under 14 years.
item code: 251001
Related products
Conv. Box Body for Tractor Vol.FH16 (56360)
incl. 19% VAT
plus Shipping
Conv. Box Body, scale 1/14, suitable for Tamiya Volvo FH16 (56360), metal kit
Product details:
Box body made of CNC-milled aluminium parts
Subframe made of sheet steel, laser-cut and CNC-bent
Plastic side panels screwed together in a sandwich design
Loading door locking with magnets
Aluminium door hinges (270° opening angle)
Dimensions: LxWxH: 545 x 195 x 195 mm
Total weight: 3,200 g
Warning! Not suitable for children under 14 years of age.
item code: 907732
2-axle boxed trailer
incl. 19% VAT
plus Shipping
2-axle boxed trailer, scale 1/14, suitable for Volvo FH16 (56360), metal kit
Product details:
Torsion-resistant steel frame in sandwich construction
Frame made of 3 and 1 mm sheet steel, laser-cut and CNC-bent
Steel sheet bogie in sandwich construction
Bearing bogie (adjustable) with sliding pads for easy manoeuvring
Drawbar (one-piece) made of fibre-reinforced plastic with chequer plate application
The drawbar is held in place by two tension springs for easier coupling
Coupling height 75 mm
Box body made of CNC-milled aluminium parts
Plastic side panels screwed on in sandwich look
Loading door locking with magnets
Aluminium door hinges (270° opening angle)
Ball-bearing chrome rims with wide tyres
Solid steel underride guard (left/right)
Detailed semi-trailer axles with dummy air springs, optionally with + 8 mm lift (kit contains both versions with/without lift)
Mudguards with splash guards
Bumper mud flap set
CNC-milled aluminium rear bumper
Decor set, detailed assembly instructions
Dimensions: LxWxH: 545 x 195 x 290 mm
Total weight: 4,800 g
Warning! Not suitable for children under 14 years of age.
item code: 907731
3-axle semi-trailer chassis Ver.III
incl. 19% VAT
plus Shipping
3-axle semi-trailer chassis Ver.III, scale 1/14, torsion-resistant steel frame (3 and 1 mm steel, laser cut) screwed together in sandwich construction, underride guard and spare wheel holder made of steel, ball-bearing chrome rims wide with wide tyres, new axle suspension optionally with lift +8 mm (included), aluminium semi-trailer supports adjustable (manually), aluminium bumper incl. 7-chamber rear lights, semi-circular mudguards, the kit is supplied unpainted, assembly instructions
Dimensions: length approx. 980 mm, width approx. 190 mm, height approx. 110 mm, weight 3,500 g
Item code: 907730
Attention! Not suitable for children under 14 years.
3-axle box trailer Ver.III white
incl. 19% VAT
plus Shipping
3-axle box trailer Ver.III white, scale 1/14, torsion-resistant steel frame (3 and 1 mm steel, lasercut) screwed together in sandwich construction, underride guard and spare wheel holder made of steel, wide chrome rims with ball bearings and wide tyres, new axle suspension optionally with height adjustment +8 mm (included), aluminium trailer supports adjustable (manual), aluminium bumper incl. 7-chamber rear lights, semi-circular mudguards, aluminium box body with plastic side panels in sandwich look (screwed together), aluminium door hinges (270° opening angle), loading door locking with magnets, the kit is supplied unpainted, assembly instructions, decal sheet
Dimensions: length approx. 980 mm, width approx. 195 mm, height approx. 300 mm, weight 7,400 g
item code: 907792
Caution! Not suitable for children under 14 years.
Flatbed trailer III made of steel
incl. 19% VAT
plus Shipping
Flatbed trailer III, scale 1/14 Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid aluminum front wall
- Detailed trailer axles with dummy air springs, optionally with a +8mm lift
- Solid steel underride protection (left/right)
- Steel spare wheel holder with spare wheel
- Chrome rims with ball bearings and wide road tires
- 7-chamber taillights and license plate
- holder included 16 lashing eyes
- Real wood floor application
- 8mm aluminum bumper
- detailed assembly instructions + decal sheet
Dimensions: LxWxH: 981 x 195 x 210mm, weight: 4,400g
Item No. 907650
Caution! Not suitable for children under the age of 14.
2-Axle Material Trailer
incl. 19% VAT
plus Shipping
2-Axle Material Trailer, As in the original and in the model, the 2-axle building material trailer reflects its attractive workmanship and appearance. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5,500 g. A new suspension is also included, this can optionally be raised by 8 mm and thus compensates for the coupling level to a raised articulated tractor. However, this can also be installed without a lift, both suspension variants are included in the kit. The built-in shock absorbers and air spring dummies function as on / off spring travel limiters. This enables a higher axle articulation and reproduces a driving image true to the original. A suitable optional accessory set (item code: 907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing set.
Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm
- CNC milled aluminum side panels with detailed surface engravings
- The side walls are locked by neodymium magnets
- All 5 drop sides are functional
- 5 hinges per side wall
- 4 hinges on the rear drop side
- Real wood floor application
- Chrome rims with ball bearings and wide tires
- Solid underrun protection made of steel (left / right)
- Detailed semi-trailer axles with dummy air springs, optionally with elevation by + 8mm (kit contains both versions with / without elevation)
- Mudguards with splash guards
- Bumper rag set
- CNC machined aluminum rear bumper
- Decor set, detailed building instructions
Dim. Trailer: LxWxH: 700 x 195 x 225 mm, Weight: 4,100 g
Dim. Structure: LxWxH: 550 x 195 x 130 mm Height of side wall 75 mm, loading height 110mm
item code: 907624
Attention! Not suitable for children under 14 years.
2-axle dolly rigid for Gigaliners
incl. 19% VAT
plus Shipping
2-axle dolly rigid for Gigaliners, in Tamiya scale, with fifth wheel for mounting Tamiya and Carson semi-trailers.
- steel frame (laser cut and welded)
- 7 chamber taillights
- 8-way ball-bearing wheels
- Air spring dummies
- Saddle plate made of plastic
- Tiller made of aluminum, adjustable in length and height
Technical specifications:
Length: 365mm
Width: approx. 195mm
Height: about 85mm
item code : 907210
Warning! Not suitable for children under 14 years.
3-axle dump trucks Fliegl Stone Master
incl. 19% VAT
plus Shipping
3-axle dump trucks Fliegl Stone Master
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.
The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.
Technical details:
Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
Optional retrofit parts
Tilting spindle drive No. 907217
Motor for spindle drive No. 907166
Motorized support legs No. 907218
Motor for trailer supports No. 907199 - required 2x
item code : 907216
Ronald Kohlmeyer –
Ich mache einfach mal eine Bewertung, denn ich bin echt begeistert.
Der Baukasten kommt in einer 1A Qualität, die Teile sind ordentlich abgepackt und aus sehr hochwertigen Kunstoff. Alle Teile passen 100% ohne nacharbeitung. Also Lacken und zusammen bauen.
Einziger Störfaktor ist für mich das sich die Pritsche nicht aufklappen lässt.
Aber das ist auch nicht schlimm da dieses Modell bei mir nur fürs Auge gedacht und nur fahren soll.
Verifizierter Kauf. Mehr Informationen