Conv. Box Body for Tractor Vol.FH16 (56360)
399,99 €
incl. 19% VAT plus Shipping
Conv. Box Body, scale 1/14, suitable for Tamiya Volvo FH16 (56360), metal kit
Product details:
Box body made of CNC-milled aluminium parts
Subframe made of sheet steel, laser-cut and CNC-bent
Plastic side panels screwed together in a sandwich design
Loading door locking with magnets
Aluminium door hinges (270° opening angle)
Dimensions: LxWxH: 545 x 195 x 195 mm
Total weight: 3,200 g
Warning! Not suitable for children under 14 years of age.
item code: 907732
In stock
Conv. Box Body, scale 1/14, suitable for Tamiya Volvo FH16 (56360), metal kit
Product details:
Box body made of CNC-milled aluminium parts
Subframe made of sheet steel, laser-cut and CNC-bent
Plastic side panels screwed together in a sandwich design
Loading door locking with magnets
Aluminium door hinges (270° opening angle)
Dimensions: LxWxH: 545 x 195 x 195 mm
Total weight: 3,200 g
Warning! Not suitable for children under 14 years of age.
You must be logged in to post a review.
You may also like…
2-axle boxed trailer
incl. 19% VAT
plus Shipping
2-axle boxed trailer, scale 1/14, suitable for Volvo FH16 (56360), metal kit
Product details:
Torsion-resistant steel frame in sandwich construction
Frame made of 3 and 1 mm sheet steel, laser-cut and CNC-bent
Steel sheet bogie in sandwich construction
Bearing bogie (adjustable) with sliding pads for easy manoeuvring
Drawbar (one-piece) made of fibre-reinforced plastic with chequer plate application
The drawbar is held in place by two tension springs for easier coupling
Coupling height 75 mm
Box body made of CNC-milled aluminium parts
Plastic side panels screwed on in sandwich look
Loading door locking with magnets
Aluminium door hinges (270° opening angle)
Ball-bearing chrome rims with wide tyres
Solid steel underride guard (left/right)
Detailed semi-trailer axles with dummy air springs, optionally with + 8 mm lift (kit contains both versions with/without lift)
Mudguards with splash guards
Bumper mud flap set
CNC-milled aluminium rear bumper
Decor set, detailed assembly instructions
Dimensions: LxWxH: 545 x 195 x 290 mm
Total weight: 4,800 g
Warning! Not suitable for children under 14 years of age.
item code: 907731
Volvo Underr.guard w/Tailight mount Tamiya Volvo FH16
incl. 19% VAT
plus Shipping
Volvo Underr.guard w/Tailight mount Tamiya Volvo FH16, Scale 1/14, made of aluminum, with taillight holder, dim .: width 175mm, height approx. 50mm, is for a conversion to the building material plateau item no. 907509 required, contents: 1 underride guard, 2 taillight holders, fastening screws
item code: 907515
Warning! Not suitable for children under 14 years.
Trailer hitch with drawbar
incl. 19% VAT
plus Shipping
Trailer hitch with drawbar, scale 1:14, housing and drawbar made of plastic boosted with fibre glass, mechanics made of steel, it works by hand or with a servo, measure: width 30mm, height 30mm, depth 36mm, fixing plate: width 22mm, height 12mm, depth 7mm, includet: 1 couplingl, 1 drawbarl, fixing screws, instruction
Item code: 907182
Related products
Draw Tube extens. Pole Trailer (56310)
incl. 19% VAT
plus Shipping
Draw Tube extens. Pole Trailer, scale 1/14, suitable for Tamiya telescopic semi-trailer (56310), metal kit
Product details:
Euro bumper with 7-chamber rear lights and number plate holder
Aluminium drawbar extension, easy to replace
For transporting goods up to a length of 1200 mm
Warning! Not suitable for children under 14 years of age.
item code: 907733
3-axle semi-trailer chassis Ver.III
incl. 19% VAT
plus Shipping
3-axle semi-trailer chassis Ver.III, scale 1/14, torsion-resistant steel frame (3 and 1 mm steel, laser cut) screwed together in sandwich construction, underride guard and spare wheel holder made of steel, ball-bearing chrome rims wide with wide tyres, new axle suspension optionally with lift +8 mm (included), aluminium semi-trailer supports adjustable (manually), aluminium bumper incl. 7-chamber rear lights, semi-circular mudguards, the kit is supplied unpainted, assembly instructions
Dimensions: length approx. 980 mm, width approx. 190 mm, height approx. 110 mm, weight 3,500 g
Item code: 907730
Attention! Not suitable for children under 14 years.
Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Büssing 8000 S 13 as a new edition in scale 1:16
In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the "S" standing for standing engine and the "13" for the total displacement of 13 liters.
More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever.
Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50's it was even allowed to couple two of these trailers. A real challenge as a captain of the road.
Technical details:
Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g.
The kit is supplied unpainted.
Scope of delivery:
- Frame made of aluminum with all drill - and threaded holes
- Ball bearing rear axle made of reinforced plastic with metal differential
- Front axle made of reinforced plastic
- Ball bearing Trilex - rims in front, in the rear Trilex - double rims
- original Fulda Coloss tires plus spare tires
- Leaf spring set front and rear made of spring steel
- driver's cab consists of several plastic parts (ABS)
- flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor
- Interior, tank, air tank, splash flaps, hardware parts, exhaust etc.
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251000
Ramp set Low loader GH TU4
incl. 19% VAT
plus Shipping
Ramp set Low loader GH TU4, scale 1/14, one-piece ramps with wooden application for self-construction or as a spare part suitable for 907400 Goldhofer TU4 low loader trailer 4-axle, all parts required for assembly are included in the scope of delivery, contents: 2 ramps, mounting hardware, wooden support, assembly instructions
Attention! Not suitable for children under 14 years.
item code: 907628
2-axis Dump Trailer
incl. 19% VAT
plus Shipping
2-axis Dump Trailer, 1/14 scale, fits the Arocs tipper Tamiya
Technical details:
• Kit
• Steel profile frame (laser cut and welded)
• Trough made of hard PVC (gray)
• 8-way ball-bearing wheels
• Fulda Variotonn off-road tires
• 7-chamber taillights
• Semitrailer axles with air spring dummies
• Automatic 2-hook rear panel lock
Length: 570mm, width: 190mm, height: 200mm, weight: 3.000g
item code: 907425
Attention! Not suitable for children under 14 years.
Goldhofer TU4 flatbed trailer
incl. 19% VAT
plus Shipping
Goldhofer TU4 flatbed trailer, scale 1/14, kit, laser cut sheet steel, one-piece ramps (manually hinged and adjustable), bogie double ball bearing, axles leaf suspension with pendulum compensation, rear support manually adjustable, 7-chamber taillights, license plate holder, fender semicircular, 16-speed ball bearing wheels , Wood supports, spacers, underride protection, decals, building instructions
Dimensions: length 855mm, width 195mm, total height 265mm, height platform 75mm, weight 5.2kg
item code: 907400
Warning! Not suitable for children under 14 years.
3-axle Fliegl Megarunner
incl. 19% VAT
plus Shipping
3-axle Fliegl Megarunner, in the Tamiya scale, kit, new aluminum door hinges with 270 ° opening angle, new door locks
The kit contains no painted parts
- Air spring dummies on all 3 axes
- steel frame, (laser cut)
- Tarpaulin red with Fliegl logo
- 6 semi-trailer rims, wide, chrome + 6 wide tires
- Wheels are 12 ball bearings
- 7-chamber taillights (without bulbs)
- Underride protection made of steel
- license plate (illuminated)
- Plastic mudguards with brackets
- Semi-trailer bumper with lasered Fliegl logo
- Semi-trailer props, mechanically height adjustable
- Spare wheel holder one-armed
- Detailed construction manual
Dimensions: 995x195x270mm Weight 6.000 gr. Max.load 10kg.
item code : 907235
Warning! Not suitable for children under 14 years.
3-axle dump trucks Fliegl Stone Master
incl. 19% VAT
plus Shipping
3-axle dump trucks Fliegl Stone Master
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook locking.
The kit is equipped with a steel frame and a steel trough including the back wall, an ABS working platform, semicircular ABS fenders, king pin, height-adjustable support legs, true to the original air suspension dummies and a ball bearing set. The 7-chamber tail lights of CARSON 3-axle dump truck Fliegl Stone Master electrically retrofitted.
Technical details:
Trough (CNC bent) and rear wall made of 2 mm sheet steel (laser-cut and 5 axis laser welding · Suspension of plastic with Luftbalgattrappen · 1 mm and 3 mm steel frame (chassis) laser cut · 12 ballraces · 6-trailers rims wide x 6 Fulda Multitonn 2 wide tires for semi-trailer rims · 7-chamber tail lights · license plate holder illuminated · plastic fenders half round with holder · Automatic 2-hook back lock · 4kant aluminum underbody protection CNC machined · trailer supports mechanically adjustable · platform / podium plastic · Hydraulic cylinder dummy
Optional retrofit parts
Tilting spindle drive No. 907217
Motor for spindle drive No. 907166
Motorized support legs No. 907218
Motor for trailer supports No. 907199 - required 2x
item code : 907216
Reviews
There are no reviews yet.