Lighting set for the Büssing 8000 S13
89,00 €
incl. 19% VAT plus Shipping
Lighting set for the Büssing 8000 S13
consisting of:
1x electronic unit with the following features:
Toggle switch for switching the power supply on and off
battery connection cable with T-plug
terminal strips for the connection of the different lighting boards
Servo cable for the connection to the receiver (switching functions)
Plug connection for connecting the socket at the rear (trailer)
Switching functions: parking light, low beam, high beam, fog light, rear lights
Brake light function via the output from the speed controller (S10 from Servonaut)
Transmission of the rear and brake light function to the trailer (socket)
2x lighting boards for the main headlight with reflector (warm glowing)
2x lighting boards for the fog lights (yellow shining)
2x lighting boards for the rear lights (red shining)
1x cable set with plug connection for the transmission of the light functions to the trailer (socket with holder)
item code: 251002
Attention. Not suitable for children under 14 years.
In stock
Lighting set for the Büssing 8000 S13
consisting of:
1x electronic unit with the following features:
Toggle switch for switching the power supply on and off
battery connection cable with T-plug
terminal strips for the connection of the different lighting boards
Servo cable for the connection to the receiver (switching functions)
Plug connection for connecting the socket at the rear (trailer)
Switching functions: parking light, low beam, high beam, fog light, rear lights
Brake light function via the output from the speed controller (S10 from Servonaut)
Transmission of the rear and brake light function to the trailer (socket)
2x lighting boards for the main headlight with reflector (warm glowing)
2x lighting boards for the fog lights (yellow shining)
2x lighting boards for the rear lights (red shining)
1x cable set with plug connection for the transmission of the light functions to the trailer (socket with holder)
Attention. Not suitable for children under 14 years.
| Weight | 0,065 kg |
|---|---|
| Dimensions | 20 × 13 × 3 cm |
Product safety
You must be logged in to post a review.
You may also like…
7,4V/1300mAh 20C LiPO battery
incl. 19% VAT
plus Shipping
7,4V/1300mAh 20C LiPO battery, T-Plug connector, suitable for the Büssing S8000 S13 ( item code: 251000 ) in connection with the lighting - set ( item code: 251002 ) or loader caterpillar LR 634 ( item code: 907111 ), content: 1 LIPO battery
item code: 608107
Attention. Not suitable for children under 14 years.
Servo CS-6
incl. 19% VAT
plus Shipping
Servo CS-6, power 6kg, low design, splash-proof, metal gear, JR - servo plug, cable approx. 250mm length, suitable for the Büssing 8000 S13 ( item code: 251000 ), content: 1 servo, 1 servo horn set
item Code: 502047
Attention. Not suitable for children under 14 years.
Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Büssing 8000 S 13 as a new edition in scale 1:16
In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the "S" standing for standing engine and the "13" for the total displacement of 13 liters.
More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever.
Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50's it was even allowed to couple two of these trailers. A real challenge as a captain of the road.
Technical details:
Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g.
The kit is supplied unpainted.
Scope of delivery:
- Frame made of aluminum with all drill - and threaded holes
- Ball bearing rear axle made of reinforced plastic with metal differential
- Front axle made of reinforced plastic
- Ball bearing Trilex - rims in front, in the rear Trilex - double rims
- original Fulda Coloss tires plus spare tires
- Leaf spring set front and rear made of spring steel
- driver's cab consists of several plastic parts (ABS)
- flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor
- Interior, tank, air tank, splash flaps, hardware parts, exhaust etc.
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251000
Related products
Universal light module LBS10
incl. 19% VAT
plus Shipping
Universal light module LBS10, fully assembled, 4 outputs with max. 350mA each, 10 different effects to choose from ( e.g. flashing light, strobe light, permanent light and running light ), BEC with 4.8 Volt or external power supply from 6-14 Volt, functions selectable via the remote control ( 3-way toggle switch or 3-way button with zero position in the middle 1-0-1 ), size (lxwxh) : approx.35 x 22 x 15mm, weight approx. 10 grams, contents: 1 electronic module, 1 servo cable, 1 jumper, 1 power cable, installation instructions
Caution! Not suitable for children under 14 years.
item code : 907685
Lighting set 3-axle trailer
incl. 19% VAT
plus Shipping
Lighting set, suitable for the 3-axle trailer art. no. 251005, for transferring the lighting functions from the tractor to the trailer.
Set consists of:
1x spiral cable with plug
2x lighting boards for the rear lights (red shining)
2x heat shrink tubing
Building instruction
Attention! Not suitable for children under 14 years.
item code: 251006
Lighting set for 2-axle trailer
incl. 19% VAT
plus Shipping
Lighting set, suitable for 2-axle trailer item code: 251003, to transfer the lighting functions from the tractor to the trailer.
Set consists of:
1x spiral cable with plug
2x lighting boards for the rear lights (red shining)
1x socket with cable ( for the connection of a second trailer )
2x heat shrink tubing
Building instruction
item code: 251004
Attention. Not suitable for children under 14 years.
All-round light electronics with BEC
incl. 19% VAT
plus Shipping
All-round light electronics with BEC, the module is connected directly to a free switching channel on the receiver, there are 6 different programs to choose from (left or right-hand rotation, 3 speeds), of which any two programs can be permanently stored and activated via the remote control, max. 2 flashing lights can be connected, operating voltage 4.8-6Volt (BEC), the device has a terminal block with four outputs, suitable for incandescent lamps with max. 100mA per output, dim .: 35x23x13mm. Contents: 1x module built and tested, 1x Servo cable Graupner J / R, connection diagram
item code: 191521
Warning! Not suitable for children under 14 years.
XBSefect RC flash electronic
incl. 19% VAT
plus Shipping
XBSefect RC flash electronic, pre-built, 4 outputs, each with max. 100mA, 15 different effects to choose from (Xenon light effect, flashing light, strobe light, permanent light and running light), BEC with 4.8 volts or external power supply of 6-14 volts, functions via the remote control can be selected (3-way toggle switch or 3- way switch with neutral position centrally 1-0-1), size (lxWxH): about 35 x 22 x 15mm, weighing about 10 grams, content: 1 electronic module, 1 power cable, 1 jumper, 1 power cable, 1 manual
item code : 191598
Electronic unit LR 634
incl. 19% VAT
plus Shipping
Electronic unit LR 634, included: 5 controller, the left and the right track forward and back, lift arm up and down, tilting forward and back, rear ripper up and down, infinitely variable, for operation the tilting and lifting with limit switch,signal for drive back, light effect, voltage control: 1 electronic unit, 1 limit switch lift arm, 1 limit stop tilting, cabling for the lighting, connecting cable, instruction
Item code: 907103
Reviews
There are no reviews yet.