7.4V/2600mAh Li-ion battery
19,99 €
incl. 19% VAT plus Shipping
7.4V/2600mAh Li-ion battery, fitted with a T-plug connector and XHP balancer, suitable for the Büssing S8000 S13 (item no. 251000) when used in conjunction with the lighting set (item no. 251002) or for the LR 634 loading caterpillar (item no. 907111), Contents: 1 Li-ion battery
Warning! Not suitable for children under 14 years of age.
item code: 608308
In stock
7.4V/2600mAh Li-ion battery, fitted with a T-plug connector and XHP balancer, suitable for the Büssing S8000 S13 (item no. 251000) when used in conjunction with the lighting set (item no. 251002) or for the LR 634 loading caterpillar (item no. 907111), Contents: 1 Li-ion battery
Warning! Not suitable for children under 14 years of age.
| Weight | 0,110 kg |
|---|---|
| Dimensions | 15 × 10 × 2 cm |
You must be logged in to post a review.
You may also like…
Lighting set for the Büssing 8000 S13
incl. 19% VAT
plus Shipping
Lighting set for the Büssing 8000 S13
consisting of:
1x electronic unit with the following features:
Toggle switch for switching the power supply on and off
battery connection cable with T-plug
terminal strips for the connection of the different lighting boards
Servo cable for the connection to the receiver (switching functions)
Plug connection for connecting the socket at the rear (trailer)
Switching functions: parking light, low beam, high beam, fog light, rear lights
Brake light function via the output from the speed controller (S10 from Servonaut)
Transmission of the rear and brake light function to the trailer (socket)
2x lighting boards for the main headlight with reflector (warm glowing)
2x lighting boards for the fog lights (yellow shining)
2x lighting boards for the rear lights (red shining)
1x cable set with plug connection for the transmission of the light functions to the trailer (socket with holder)
item code: 251002
Attention. Not suitable for children under 14 years.
Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Büssing 8000 S 13 as a new edition in scale 1:16
In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the "S" standing for standing engine and the "13" for the total displacement of 13 liters.
More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever.
Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50's it was even allowed to couple two of these trailers. A real challenge as a captain of the road.
Technical details:
Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g.
The kit is supplied unpainted.
Scope of delivery:
- Frame made of aluminum with all drill - and threaded holes
- Ball bearing rear axle made of reinforced plastic with metal differential
- Front axle made of reinforced plastic
- Ball bearing Trilex - rims in front, in the rear Trilex - double rims
- original Fulda Coloss tires plus spare tires
- Leaf spring set front and rear made of spring steel
- driver's cab consists of several plastic parts (ABS)
- flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor
- Interior, tank, air tank, splash flaps, hardware parts, exhaust etc.
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251000
Related products
Rear light for trailers
incl. 19% VAT
plus Shipping
Rear light for trailers, scale 1/16 to 1/14.5, new design, with lighting circuit board, from 6 to 13.5 volts, light functions: parking light, brake light, indicator l+r, reversing light, fog light, dimensions (lxwxh): 32x12x7mm, cable length 700 mm, contents: 1 pair of rear lights with boards, mounting screws, instructions
Warning! Not suitable for children under 14 years of age.
item code: 191541
Intermediate bearing block
incl. 19% VAT
plus Shipping
Intermediate bearing block, suitable for extra-long cardan shafts with an installation length of 165 mm to 330 mm, compatible with our cardan shafts, item nos. 251260 to 251287, double ball bearing, 5 mm steel shaft, total width 62 mm, height 15 mm, thickness 8 mm, shaft length 26 mm, contents: 1 bearing block, mounting screws
Warning! Not suitable for children under 14 years of age.
item code: 251240
Servo bracket set steering axle low loader
incl. 19% VAT
plus Shipping
Servo holder set, suitable for the Carson lowbed low loader Art. no. 907700, steel holders, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907701
3-axle low loader swan hand/low bed
incl. 19% VAT
plus Shipping
3-axle low loader swan hand/low bed, scale 1/14, metal construction kit
Delivery date: September 2024
Product details:
- Torsion-resistant steel frame (sandwich construction)
- Frame and gooseneck made of 2 and 1 mm sheet steel (laser cut/CNC bent)
- Low loader axles made of steel with leaf spring assemblies
- Incl. spindle drive for lowering and lifting the low bed
- Solid aluminum lifting device
- Ball bearing mounted plastic rims with double tires (solid rubber)
- Platform with real wood inlay
- Aluminum drive-on ramps
- Storage box with lid (magnetic lock)
- Two storage compartments under the platform for electronic components
- Prepared for the installation of steering axles
- 4 warning signs (adjustable)
- 12 retractable lashing eyes for load securing
- Rotating beacon holder on bracket (suitable for item no. 907579)
- Mud flaps
- Instructions and decal sheet
- Dimensions: Length 1,150 mm, width 205 mm, height 170 mm
- Total weight: 7,500 g (gooseneck 2,500 g, drop deck 5,000 g)
- Lifting force / load max. 25,000g
Caution! Not suitable for children under 14 years.
item code: 907700
Universal light module LBS10
incl. 19% VAT
plus Shipping
Universal light module LBS10, fully assembled, 4 outputs with max. 350mA each, 10 different effects to choose from ( e.g. flashing light, strobe light, permanent light and running light ), BEC with 4.8 Volt or external power supply from 6-14 Volt, functions selectable via the remote control ( 3-way toggle switch or 3-way button with zero position in the middle 1-0-1 ), size (lxwxh) : approx.35 x 22 x 15mm, weight approx. 10 grams, contents: 1 electronic module, 1 servo cable, 1 jumper, 1 power cable, installation instructions
Caution! Not suitable for children under 14 years.
item code : 907685
Reviews
There are no reviews yet.