Transfer gear box
Transfercase for 4-wheel drive
Transfercase for 4-wheel drive, support set, the front axle can be connect with a servo, the output shaft have a diameter from 5mm and be feature with 4 ball bearings, speed reduction 2:1, this set is suitable for the 3-gear with item code 251100, instruction and fixing parts are included
Item code 251180
Motor flange Mabuchi-Igarashi und Carson Poison Truckmotor
Dunker motor 12 Volt
Dunker motor 12 Volt, Nennspg. 12 Volt, agitator speed from the engine idle 3600 U/min, current at the engine idle 0,6 A, speed rating 3100 U/min, Leistung 44,5 W, rating current 5,2 A, starting torque 82 Ncm, rated torque 13,7 Ncm, power efficiency 71%, weightt 1200g, suitable with the 2-speed control gear box with item code 242424
Item code: 221259
Holder for mounting upright
2-speed control gear box
2-speed control gear box, suitable for the Dunker motor with item code: 221259, ball bearing triple, speed-reduction 1.gear 2:1 , 2.gear 1:1 , switching during the driving it`s posible with a servo, housing from aluminum, driving shaft SW5, shaft and pinion`s are hardened, initial speed max. 6000 U/min, control rod and fixing part`s are included, for fixed it with an other motor you need the adaptor with item code: 220324
Item code: 242424
3-speed gearbox with transfer case
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105