Lighting set 3-axle trailer
Lighting set, suitable for the 3-axle trailer art. no. 251005, for transferring the lighting functions from the tractor to the trailer.
Set consists of:
1x spiral cable with plug
2x lighting boards for the rear lights (red shining)
2x heat shrink tubing
Building instruction
Attention! Not suitable for children under 14 years.
item code: 251006
Daytime running light Actros
Daytime running light Actros, scale 1/14, suitable for the Tamiya MB Actros 2/3 axles, new housing with inserted daytime running light, from 7.2 to 12 volts operating voltage with appropriate resistor, content: 1 set of housing including daytime running light, resistors, installation instructions.
item code: 907677
Attention : Not suitable for the MFC from Tamiya
Caution. Not suitable for children under 14 years.
3-chamber tail light with lighting board
3-chamber tail light with lighting board, scale 1/14, for 7,2 Volt, for 12 Volt use supplied diode, light functions: Rear light, brake light and turn signal, black perforated mask for LED - effect, cable length approx. 550mm, Ø of housing 11mm, height 7,5mm, fixing screw centered M2, content: 2 prefabricated housings with light inserts, circuit board and cable, 2x red glasses, 2x orange glasses, 2x perforated mask self-adhesive, 2x fixing screw, 1 diode at 12 Volt operating voltage
item code: 907679
Attention : Not suitable for the MFC from Tamiya
Attention. Not suitable for children under 14 years.
Lighting set for 2-axle trailer
Lighting set, suitable for 2-axle trailer item code: 251003, to transfer the lighting functions from the tractor to the trailer.
Set consists of:
1x spiral cable with plug
2x lighting boards for the rear lights (red shining)
1x socket with cable ( for the connection of a second trailer )
2x heat shrink tubing
Building instruction
item code: 251004
Attention. Not suitable for children under 14 years.
Lighting set for the Büssing 8000 S13
Lighting set for the Büssing 8000 S13
consisting of:
1x electronic unit with the following features:
Toggle switch for switching the power supply on and off
battery connection cable with T-plug
terminal strips for the connection of the different lighting boards
Servo cable for the connection to the receiver (switching functions)
Plug connection for connecting the socket at the rear (trailer)
Switching functions: parking light, low beam, high beam, fog light, rear lights
Brake light function via the output from the speed controller (S10 from Servonaut)
Transmission of the rear and brake light function to the trailer (socket)
2x lighting boards for the main headlight with reflector (warm glowing)
2x lighting boards for the fog lights (yellow shining)
2x lighting boards for the rear lights (red shining)
1x cable set with plug connection for the transmission of the light functions to the trailer (socket with holder)
item code: 251002
Attention. Not suitable for children under 14 years.
7,4V/1300mAh 20C LiPO battery
7,4V/1300mAh 20C LiPO battery, T-Plug connector, suitable for the Büssing S8000 S13 ( item code: 251000 ) in connection with the lighting - set ( item code: 251002 ) or loader caterpillar LR 634 ( item code: 907111 ), content: 1 LIPO battery
item code: 608107
Attention. Not suitable for children under 14 years.
Servo CS-6
Servo CS-6, power 6kg, low design, splash-proof, metal gear, JR - servo plug, cable approx. 250mm length, suitable for the Büssing 8000 S13 ( item code: 251000 ), content: 1 servo, 1 servo horn set
item Code: 502047
Attention. Not suitable for children under 14 years.
Achtung! Nicht für Kinder unter 14 Jahren geeignet.
2-axle trailer
2-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
( the expected delivery date is in November )
The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50's it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.
A lighting set is optionally available for the 2-axle trailer (item no. 251004).
Technical details:
Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed
- Drop sides made of injection molded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tires
- Bracket with spare tire
- Platform with real wooden floor
- Tail lights with license plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251003
Drive set for the Büssing 8000 S 13
Drive set for the Büssing 8000 S 13, consisting of a 7.2 volt underfloor motor with planetary gearbox from the company Servonaut, the motor is pre-disturbed , has an idle speed of 470 rpm, the rated speed is 390 rpm, rated torque: 34.6 Ncm, the matching motor holder made of aluminum and the cardan shaft made of stainless steel with appropriate length compensation, mounting hardware and installation instructions. Contents: 1 gear motor, 1 motor holder, 1 cardan shaft, installation instructions
Caution. Not suitable for children under 14 years.
item code: 251001