Universal – Differential
39,50 €
incl. 19% VAT plus Shipping
Universal – Differential, with spur gears, housing from aluminium turned, pinion`s from steel, the input comes from the pinion with item code: 216224 over the housing, also you have 2 half wave`s with a diameter from 6mm for the power transmission at one`s disposal
Item code: 216208
In stock
Description
Universal – Differential, with spur gears, housing from aluminium turned, pinion`s from steel, the input comes from the pinion with item code: 216224 over the housing, also you have 2 half wave`s with a diameter from 6mm for the power transmission at one`s disposal
Additional information
| Weight | 0,060 kg |
|---|---|
| Dimensions | 13 × 7 × 3,5 cm |
| Lieferzeit |
Product safety
Product safety
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
You may also like…
Related products
TRANSFERCASE FOR 4WD DRIVE 1:1
incl. 19% VAT
plus Shipping
Transfer case, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 1: 1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Item code 251190
2-speed control gear box
incl. 19% VAT
plus Shipping
2-speed control gear box, suitable for the Dunker motor with item code: 221259, ball bearing triple, speed-reduction 1.gear 2:1 , 2.gear 1:1 , switching during the driving it`s posible with a servo, housing from aluminum, driving shaft SW5, shaft and pinion`s are hardened, initial speed max. 6000 U/min, control rod and fixing part`s are included, for fixed it with an other motor you need the adaptor with item code: 220324
Item code: 242424
3-speed gearbox with transfer case
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Reviews
There are no reviews yet.