Rear light for trailers
59,90 €
incl. 19% VAT plus Shipping
Rear light for trailers, scale 1/16 to 1/14.5, new design, with lighting circuit board, from 6 to 13.5 volts, light functions: parking light, brake light, indicator l+r, reversing light, fog light, dimensions (lxwxh): 32x12x7mm, cable length 700 mm, contents: 1 pair of rear lights with boards, mounting screws, instructions
Warning! Not suitable for children under 14 years of age.
item code: 191541
In stock
Rear light for trailers, scale 1/16 to 1/14.5, new design, with lighting circuit board, from 6 to 13.5 volts, light functions: parking light, brake light, indicator l+r, reversing light, fog light, dimensions (lxwxh): 32x12x7mm, cable length 700 mm, contents: 1 pair of rear lights with boards, mounting screws, instructions
Warning! Not suitable for children under 14 years of age.
| Weight | 0,015 kg |
|---|---|
| Dimensions | 13 × 7 × 1 cm |
You must be logged in to post a review.
Related products
7-chamber rear light with clearance light 7.2V
incl. 19% VAT
plus Shipping
7-chamber rear light with clearance light and 7.2-volt lighting board, suitable for 1/16 – 1/14.5 scale models, pre-assembled and ready to connect, clearance light made of flexible rubber, white and red LEDs, with plastic inserts for better illumination of the individual chambers, fitted with SMD LEDs, common positive terminal, 4 light functions: indicator, tail light + clearance light, brake light and reversing light, cable length approx. 60 cm, dimensions: LxWxH: 51x12x7 mm, contents: 1 left rear light, 1 right rear light, instructions
Warning! Not suitable for children under 14 years of age.
item code: 191523
3-chamber tail light with lighting board
incl. 19% VAT
plus Shipping
3-chamber tail light with lighting board, scale 1/14, for 7,2 Volt, for 12 Volt use supplied diode, light functions: Rear light, brake light and turn signal, black perforated mask for LED - effect, cable length approx. 550mm, Ø of housing 11mm, height 7,5mm, fixing screw centered M2, content: 2 prefabricated housings with light inserts, circuit board and cable, 2x red glasses, 2x orange glasses, 2x perforated mask self-adhesive, 2x fixing screw, 1 diode at 12 Volt operating voltage
item code: 907679
Attention : Not suitable for the MFC from Tamiya
Attention. Not suitable for children under 14 years.
Drive shaft set (2) 6×4 with compensation
incl. 19% VAT
plus Shipping
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
6-chamber tail light with lighting board 7.2 volt
incl. 19% VAT
plus Shipping
6-chamber tail light with lighting board 7.2 volt, ready-made, suitable for the scale 1/16 – 1 / 14.5, with plastic inserts for better illumination of the individual chambers, equipped with SMD LEDs, common positive pole, 5 light functions: turn signal, brake light, Driving light + position light, reversing lamp and fog lamp, cable length approx. 60cm, dim .: LxWxH: 38x11x6,5mm, content: 1 tail light left, 1 tail light right, 4 fixing screws M2x6, instructions
item code: 191531
Warning! Not suitable for children under 14 years
Reviews
There are no reviews yet.