Kingpin Wedico
4,90 €
incl. 19% VAT plus Shipping
Kingpin Wedico, 1/16 scale, made of hardened steel, with M3 fixing screw, dimensions: diameter 7 mm, collar diameter 4.8 mm, height 8 mm, contents: 1 kingpin, 1 M3x16 fixing screw + M3 nut
Warning! Not suitable for children under 14 years of age.
item code: 220962
In stock
Description
Kingpin Wedico, 1/16 scale, made of hardened steel, with M3 fixing screw, dimensions: diameter 7 mm, collar diameter 4.8 mm, height 8 mm, contents: 1 kingpin, 1 M3x16 fixing screw + M3 nut
Warning! Not suitable for children under 14 years of age.
Additional information
| Weight | 0,005 kg |
|---|---|
| Dimensions | 13,5 × 7 × 1 cm |
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
Scania SLT8x4 warning bar/strobo set
incl. 19% VAT
plus Shipping
Scania SLT8x4 warning bar/strobo set, suitable for the Scania SLT8x4 from Tamiya, for 7.2 or 12 volt, warning bar SMD LED circuit board with 40 SMD LEDs, 2 rotating beacons
with strobe function, contents: 1 warning bar circuit board, 2 rotating beacon inserts, installation instructions
Suitable electronics: 907685 Universal light module LBS (not included)
Attention : Not suitable for the MFC
Caution! Not suitable for children under 14 years of age.
item code: 907697
Drive shaft set (2) 6×4 with compensation
incl. 19% VAT
plus Shipping
Drive shaft set (2) 6x4 with compensation, scale 1/14
This drive shaft set is required when a 3-axle tractor is upgraded with two self-locking axles.
(Application: From TAMIYA 3-speed transmission to rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft with length compensation from 3-G gearbox (TAMIYA) to the rear axle 1 91 mm (91 - 96 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (38 - 43 mm)
- Material: hardened steel
Content: 2 drive shafts
item code: 907636
Caution! Not suitable for children under 14 years of age.
Windshield wiper – set
incl. 19% VAT
plus Shipping
Windshield wiper - set, scale 1/14, suitable for construction machines, buses, snowcats and so on, from plastic, included: a big doublearm-wiper and a small wiper, measure: small wiper: total length 42mm, wiper plade 31mm, arbor hole 2mm, big wiper: length from the wiper plade 60mm, from the arm 53mm, arbor hole 2mm, the set included 5 pices
item code: 207046
Caution! Not suitable for children under 14 years of age.
Ramp set Low loader GH TU4
incl. 19% VAT
plus Shipping
Ramp set Low loader GH TU4, scale 1/14, one-piece ramps with wooden application for self-construction or as a spare part suitable for 907400 Goldhofer TU4 low loader trailer 4-axle, all parts required for assembly are included in the scope of delivery, contents: 2 ramps, mounting hardware, wooden support, assembly instructions
Attention! Not suitable for children under 14 years.
item code: 907628
Reviews
There are no reviews yet.