Four-wheel transfer case 1:1 with self-locking differential
137,50 €
incl. 19% VAT plus Shipping
Four-wheel gear box transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 1: 1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251200
Warning! Not suitable for children under 14 years.
In stock
Four-wheel gear box transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 1: 1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Warning! Not suitable for children under 14 years.
| Weight | 0,149 kg |
|---|---|
| Dimensions | 11 × 10 × 6,5 cm |
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
Related products
1/8 transfer case with differential, reduction ratio 1:1
incl. 19% VAT
plus Shipping
Transfer case with longitudinal differential, scale 1/8, reduction ratio 1:1, permanent all-wheel drive, milled aluminum housing, hardened steel gears, multiple ball bearings, input and output shafts with 5mm hexagon, aluminum mounting bracket, weight: 330g, dimensions: housing (wxhxl) 69x44x50mm, total length with hexagon shafts 73mm, contents: 1 transfer case with bracket and mounting screws
item code: 216140
Caution! Not suitable for children under 14 years of age.
Driven front axle with self-locking differential
incl. 19% VAT
plus Shipping
Driven front axle with self-locking differential, very true to detail, for truck models in the scale 1/16.
The axle is equipped with a self-locking differential and can be built with, as well as without through drive, both shafts and axle covers are included. The drive axle is permanently locked and opens when cornering. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages for the differential locks are needed. This is also the clarity and the space in the chassis to good. The axle components are housed in a heavy-duty reinforced plastic axle housing.
• Lifelike front axle
• high ground clearance thanks to a "slim" differential housing (height 35 mm)
• 13-times ball-bearing
• self-locking differential (shift servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axial ratio 1: 3, the direction of rotation can be adjusted by fitting the differential to your model.
• 4 mm transmission / input shaft
• Axle shaft 6mm, fits the most popular rims in 1/16 scale
• simple conversion to the axle with and without through drive (both shafts and axle covers are included in the kit)
• Dimensions front axle LxWxH: 57 x 167 x 35 mm
• with flanged wheel hub, suitable for the most common rims in 1/16 scale
• Weight approx. 160 g
• Supplied as a kit with pre-assembled differential
• suitable for the most common axle suspensions, including attachment point for pendulum suspension systems
item code: 251215
Warning! Not suitable for children under 14 years.
Rear axle with self-locking differential
incl. 19% VAT
plus Shipping
Rear axle with self-locking differential, very true to detail, for truck models in the scale 1/16.
The axle is equipped with a self-locking differential and can be built with, as well as without through drive, both shafts and axle covers are included. The drive axle is permanently locked and opens when cornering. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages for the differential locks are needed. This is also the clarity and the space in the chassis to good. The axle components are housed in a heavy-duty reinforced plastic axle housing.
• Exactly modeled rear axle
• high ground clearance thanks to a "slim" differential housing (height 35 mm)
• 11 ball bearings
• self-locking differential (shift servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axial ratio 1: 3, the direction of rotation can be adjusted by fitting the differential to your model.
• 4 mm transmission / input shaft
• Axle shaft 6mm, fits the most popular rims in 1/16 scale
• simple conversion to the axle with and without through drive (both shafts and axle covers are included in the kit)
• Dimensions rear axle LxWxH: 46 x 165 x 35 mm
• Weight approx: 130 g
• Supplied as a kit with pre-assembled differential
• suitable for the most common axle suspensions, including attachment point for pendulum suspension systems
item code: 251210
Warning! Not suitable for children under 14 years.
1/14 Alloy 2-speed transfer case with speed compensation
incl. 19% VAT
plus Shipping
1/14 Alloy 2-speed transfer case with speed compensation and self-locking longitudinal differential.
The 2-speed transfer case is designed for use in TAMIYA 2- and 3-axle chassis in conjunction with the 2-speed manual transmission Compact. It offers you the possibility to convert or upgrade your model to all-wheel drive. It impresses with its simple installation, as existing bores/threads are used here. The transfer case offers two additional shiftable gears and a self-locking longitudinal differential that compensates for the difference in speed between the front and rear axles and, in the event of a loss of traction, activates the differential lock independently/automatically and ensures 100% traction.
Note: By using the 2-speed transfer case, the battery mount must be removed and the 7.2 V drive battery must be placed in the cab.
Transfer case for driving one or more driven front and rear axles
2-speed shiftable (1st gear 3:1 / 2nd gear 1:1)
7-fold ball bearing
CNC milled aluminum housing
Hardened steel gears
5 mm gear/output shaft
The gears are shifted by a micro-servo
Built-in longitudinal differential for speed compensation between front and rear axles
Easy mounting by using existing holes (4 screws) on the TAMIYA ladder frame
Dimensions distributor LxWxH: 32 x 62 x 40 mm
Weight approx. 120 g.
Caution! Not suitable for children under the age of 14.
item code: 907266
Reviews
There are no reviews yet.