Electronic unit LR 634
490,00 €
incl. 19% VAT plus Shipping
Electronic unit LR 634, included: 5 controller, the left and the right track forward and back, lift arm up and down, tilting forward and back, rear ripper up and down, infinitely variable, for operation the tilting and lifting with limit switch,signal for drive back, light effect, voltage control: 1 electronic unit, 1 limit switch lift arm, 1 limit stop tilting, cabling for the lighting, connecting cable, instruction
Item code: 907103
In stock
Electronic unit LR 634, included: 5 controller, the left and the right track forward and back, lift arm up and down, tilting forward and back, rear ripper up and down, infinitely variable, for operation the tilting and lifting with limit switch,signal for drive back, light effect, voltage control: 1 electronic unit, 1 limit switch lift arm, 1 limit stop tilting, cabling for the lighting, connecting cable, instruction
| Weight | 1 kg |
|---|---|
| Lieferzeit | approx: 2-3 days |
Product safety
You must be logged in to post a review.
You may also like…
Liebherr LR 634 track loader
incl. 19% VAT
plus Shipping
Liebherr LR 634 Track Loader
Heavy metal for the construction site!
Assembly Kit as pedestal model without functions.
With lots of massive steel and aluminium components, the Carson model of the Liebherr LR 634 track loader is a true heavyweight, and above all an operational construction vehicle at 1:14 scale.
item code: 907111
Related products
Universal light module LBS10
incl. 19% VAT
plus Shipping
Universal light module LBS10, fully assembled, 4 outputs with max. 350mA each, 10 different effects to choose from ( e.g. flashing light, strobe light, permanent light and running light ), BEC with 4.8 Volt or external power supply from 6-14 Volt, functions selectable via the remote control ( 3-way toggle switch or 3-way button with zero position in the middle 1-0-1 ), size (lxwxh) : approx.35 x 22 x 15mm, weight approx. 10 grams, contents: 1 electronic module, 1 servo cable, 1 jumper, 1 power cable, installation instructions
Caution! Not suitable for children under 14 years.
item code : 907685
Lighting set 3-axle trailer
incl. 19% VAT
plus Shipping
Lighting set, suitable for the 3-axle trailer art. no. 251005, for transferring the lighting functions from the tractor to the trailer.
Set consists of:
1x spiral cable with plug
2x lighting boards for the rear lights (red shining)
2x heat shrink tubing
Building instruction
Attention! Not suitable for children under 14 years.
item code: 251006
7,4V/1300mAh 20C LiPO battery
incl. 19% VAT
plus Shipping
7,4V/1300mAh 20C LiPO battery, T-Plug connector, suitable for the Büssing S8000 S13 ( item code: 251000 ) in connection with the lighting - set ( item code: 251002 ) or loader caterpillar LR 634 ( item code: 907111 ), content: 1 LIPO battery
item code: 608107
Attention. Not suitable for children under 14 years.
All-round light electronics with BEC
incl. 19% VAT
plus Shipping
All-round light electronics with BEC, the module is connected directly to a free switching channel on the receiver, there are 6 different programs to choose from (left or right-hand rotation, 3 speeds), of which any two programs can be permanently stored and activated via the remote control, max. 2 flashing lights can be connected, operating voltage 4.8-6Volt (BEC), the device has a terminal block with four outputs, suitable for incandescent lamps with max. 100mA per output, dim .: 35x23x13mm. Contents: 1x module built and tested, 1x Servo cable Graupner J / R, connection diagram
item code: 191521
Warning! Not suitable for children under 14 years.
XBSefect RC flash electronic
incl. 19% VAT
plus Shipping
XBSefect RC flash electronic, pre-built, 4 outputs, each with max. 100mA, 15 different effects to choose from (Xenon light effect, flashing light, strobe light, permanent light and running light), BEC with 4.8 volts or external power supply of 6-14 volts, functions via the remote control can be selected (3-way toggle switch or 3- way switch with neutral position centrally 1-0-1), size (lxWxH): about 35 x 22 x 15mm, weighing about 10 grams, content: 1 electronic module, 1 power cable, 1 jumper, 1 power cable, 1 manual
item code : 191598
Spindle drive set lift & bucket LR 634
incl. 19% VAT
plus Shipping
Spindle drive set lift & bucket LR 634, suitable for the Liebherr track loader LR 634 with item code: 907111. Spindle`s and driving pinion`s are from hardened steel, housing from aluminium, pre-installed, with all of the fixing parts and instruction, included: 1 lift spindle and 1 bucket spindle with a cylinder cap. Therefor suitable the gear motor`s with item code: 907108 for the bucket and 907066 for the lift (not included in this set).
Item code: 907102
Reviews
There are no reviews yet.