Showing all 6 results

Trailer axle for classic trucks

19,90 
Trailer axle for classic trucks, scale 1/16, axle made of 8mm steel, leaf spring mount made of plastic, suitable for the leaf spring set art.no. 2124, distance between leaf springs approx. 50mm ( from centre to centre ), track width approx. 150mm with double tyres ( trilex rims art.no. 220995 ), contents: 1 axle shaft, 1 set of leaf spring mounts, fixing material Attention! Not suitable for children under 14 years. item code:  220992

Rear axle for classic trucks

99,90 
Rear axle for classic trucks, scale 1/16, reduction 3:1, bevel gears and spur differential made of hardened steel, 6 ball bearings, reinforced axle housing made of plastic, input and output shafts 5mm Ø, track width 150mm (with our Trilex - double rims item no. 220995), mounting width of the leaf springs 58mm, suitable for a frame width of 50mm, kit with detailed assembly instructions. Attention! Not suitable for children under 14 years. item code: 220993

Rear axle with self-locking differential (robbe)

174,90 
Rear axle with self-locking differential (robbe), very true to detail, for truck models in the scale 1:16. The axle is equipped with a self-locking differential and can be built with, as well as without through drive, both shafts and axle covers are included. The drive axle is permanently locked and opens when cornering. A major advantage of this drive axle is that NO shift servos, Bowden cables and linkages are required for the differential locks. This is also the clarity and the space in the chassis to good. The axle components are housed in a heavy-duty reinforced plastic axle housing. • Reproduction of the rear axle • high ground clearance thanks to a "slim" differential housing (height 35 mm) • 11 ball bearings • self-locking differential (switching servo, linkages and Bowden cables are not required) • Hardened steel bevel gears • Axial ratio 1: 3, the direction of rotation can be adjusted by fitting the differential to your model. • 4 mm transmission / input shaft • Axle shaft 5mm (robbe dimension), suitable for the most common 1/16 scale rims • simple conversion to axle with and without through drive (both shafts and axle covers are included in the kit) • Dimensions rear axle LxWxH: 46 x 137 x 35 mm • Weight approx. 130 g • Supplied as a kit with pre-assembled differential • suitable for the most common axle suspensions, including attachment point for pendulum suspension systems
item code: 251220 Warning! Not suitable for children under 14 years.

Driven front axle with self-locking differential

218,90 
Driven front axle with self-locking differential, very true to detail, for truck models in the scale 1/16. The axle is equipped with a self-locking differential and can be built with, as well as without through drive, both shafts and axle covers are included. The drive axle is permanently locked and opens when cornering. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages for the differential locks are needed. This is also the clarity and the space in the chassis to good. The axle components are housed in a heavy-duty reinforced plastic axle housing. • Lifelike front axle • high ground clearance thanks to a "slim" differential housing (height 35 mm) • 13-times ball-bearing • self-locking differential (shift servo, linkages and Bowden cables are not required) • Hardened steel bevel gears • Axial ratio 1: 3, the direction of rotation can be adjusted by fitting the differential to your model. • 4 mm transmission / input shaft • Axle shaft 6mm, fits the most popular rims in 1/16 scale • simple conversion to the axle with and without through drive (both shafts and axle covers are included in the kit) • Dimensions front axle LxWxH: 57 x 167 x 35 mm • with flanged wheel hub, suitable for the most common rims in 1/16 scale • Weight approx. 160 g • Supplied as a kit with pre-assembled differential • suitable for the most common axle suspensions, including attachment point for pendulum suspension systems item code: 251215 Warning! Not suitable for children under 14 years.

Rear axle with self-locking differential

174,90 
Rear axle with self-locking differential, very true to detail, for truck models in the scale 1/16. The axle is equipped with a self-locking differential and can be built with, as well as without through drive, both shafts and axle covers are included. The drive axle is permanently locked and opens when cornering. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages for the differential locks are needed. This is also the clarity and the space in the chassis to good. The axle components are housed in a heavy-duty reinforced plastic axle housing. • Exactly modeled rear axle • high ground clearance thanks to a "slim" differential housing (height 35 mm) • 11 ball bearings • self-locking differential (shift servo, linkages and Bowden cables are not required) • Hardened steel bevel gears • Axial ratio 1: 3, the direction of rotation can be adjusted by fitting the differential to your model. • 4 mm transmission / input shaft • Axle shaft 6mm, fits the most popular rims in 1/16 scale • simple conversion to the axle with and without through drive (both shafts and axle covers are included in the kit) • Dimensions rear axle LxWxH: 46 x 165 x 35 mm • Weight approx: 130 g • Supplied as a kit with pre-assembled differential • suitable for the most common axle suspensions, including attachment point for pendulum suspension systems item code: 251210 Warning! Not suitable for children under 14 years.

Front axles for classic trucks

37,30 
Front axles for classic trucks, plastic axis and linkages, bolts and tie rods of steel item code:  220994