Showing all 10 results

Plast. Parts Trailersus. w/8mm lift

29,99 
Plast. Parts Trailersus. w/8mm lift, scale 1/14, made of plastic, for converting the existing air suspension axle, suitable for all Carson trailers up to 09/21 (except for all low-loaders), optionally with 8mm lift, the new plastic parts and the air bellows allow a higher spring travel and a larger twisting of the axle, one set is required for each trailer axle, the metal parts and the assembly material are taken over from the existing axle, Content: 1 set of standard swing arms, 1 set of swing arms with + 8mm lift, 1 set of brackets, 2 air bellows
item code: 907644
Caution! Not suitable for children under 14 years of age.

Trailer axle with lift kit + 8mm

82,99 
Trailer axle with lift kit + 8mm, scale 1/14, the new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving pattern that is absolutely true to the original. The two suspensions included (standard & with raised height + 8mm) offer you the option of adapting your trailer to your higher (+ 8mm) tractor from the saddle level. Content: Trailer axle with lift kit, attachments, assembly instructions Item No. 907643 Caution! Not suitable for children under 14 years of age.

Pivoted bogie with axle

190,00 
Pivoted bogie with axle, scale 1/14, bogie for self-construction of trailer chassis, made of sheet steel, dimensions: length with drawbar 265mm, without 95mm, width with axle 165mm, without 100m, height 75mm, content: 1 set of steel parts for bogie, 1 plastic drawbar, 1 axle with dummy air springs, 1 pivot bearing with sliding washers, fastening material, instructions Technical details: - Bogie made of sheet steel in sandwich construction - Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering - Drawbar (one-piece) made of fiber -reinforced plastic with checkered plate application - The drawbar is held by two tension springs for easier attachment - Coupling height 75 mm- Trailer axle with dummy air suspensionDanger! Attention! Not suitable for children under 14 years. item code: 907625

1/14 driven front axle with self-locking differential

235,00 
1/14 driven front axle with self-locking differential The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG. The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application. • The front axle is modeled in detail • Reinforced plastic axle housing • CNC machined aluminum stub / steering lever • High ground clearance thanks to a "slim" differential housing (height 33 mm) • 16-way ball bearing • Self-locking differential (shifter servo, linkages and Bowden cables are not required) • Hardened steel bevel gears • Axis ratio 1: 2.66 • Maximum steering angle 42 ° • 5 mm transmission / input shaft • Aluminum rim driver 12 mm hexagonal • Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit) • Dimensions front axle LxBxH: 44 x 160 x 33 mm • Weight approx. 175 g • Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design 12 (mm hex wrench) • Incl. Tie rod • The mounting kit (907280) is required to mount the front axle item code 907267

1/14 Rear axle w/Diff.-Lock&fixed drive

200,00 
1/14 Rear axle w/Diff.-Lock&fixed drive Official licensed by ZF Friedrichshafen AG. The CARSON drive concept for TAMIYA trucks in 1:14 scale Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A huge advantage of these axles is that there is no need for additional space for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically when there is a traction loss. Officially licensed by ZF Friedrichshafen AG. - Detailed rear axle - Reinforced plastic axle housing - High ground clearance thanks to a slim? Differential housing (height 33 mm) - 12-way ball bearing - Hardened steel bevel gears - axle ratio 1: 2,66 - 5 mm transmission / input shaft - Aluminum rim driver 12 mm hexagon - Easy conversion to the axle with and without drive (both shafts and housing covers are included in the axle kit) - Dimensions rear axle LxBxH: 44 x 135 x 33 mm - Weight approx. 150 g - Delivered as kit with pre-assembled differential - Suitable for TAMIYA suspension and independent suspension - Suitable for all TAMIYA and CARSON truck rims with 12 mm hexagonal driver - Self-locking differential (shifter servo, linkages and Bowden cables are not required) item code 907268

Flat bed axle with bellow dummys

76,99 
Flat bed axle with bellow dummys, scale 1/14, kit from boosted fiber glass-plastik,axle shaft from metal, track width with tires 190mm, to need a width of frame from 76mm, diameter of the wheel axle 5mm, shipment from the kit include are 1 axle with fixing parts and construction manual Item code : 907140

Steering rod

8,49 
Steering rod, scale 1/14, curved from steel, with this tie rod the steering works better, suitable for all Tamiya euro-trucks, Quantity : 1 steering rod and construction manual item code : 13516

Wheel bolt remodeling-set

18,29 
Wheel bolt remodeling-set, for the front axle from all Tamiya - truck´s, if you change the wheel bolts and the ball heads you can reduce the clearenc ofthe wheel to a minimumt, so the steering works better, this shipment included: 2 wheel boltsfrom steel, 2 ball headsfrom steel, 2 shim rings and 2 lock washers and construction manual, Quantity: 1 set Item code : 907091

Semitrailer with flat springs

59,99 
Semitrailer axle with flat springs, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 168mm, length of the flat springs ca.87mm, distance from centre to centre from the flat springs ca.112mm, holding fixture for flat springs from plastic, suitable for a width of frame from 96mm, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts Item code : 907355

Flat bed axle with flat springs

59,99 
Flat bed axle with flat spings, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 176mm, length of the flat springs ca.70mm, distance from middle to middle from the flat springs ca.120mm, holding fixture for flat springs from plastic, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts Item code : 907354