Showing all 21 results

Idler

14,20 
Idler, turned from aluminum, diameter 51mm, width 16mm, 6mm holewith two bearing bushes, Contents: 1 piece item code : 215069

Sprocket 19 teeth

19,70 
Sprocket 19 teeth, scale 1/14, aluminum, diameter 47.5mm6mm bore, width teeth 5.5mm, total width 11,5mmwith cross hole M3 to fix, Contents: 1 chain, 1 set screw M3x5 item code : 215068

Supporting role

18,10 
Supporting role, made of steel, diameter 27mm, overall width 27mm, hole 6mm, doubly Flow wheels, contents: 1 supporting role item code : 215085

Track roller

18,10 
Track roller, made of steel, diameter 30mm, overall width 30mm, hole 6mm, doubly Flow wheels, Contents: 1 Track roller item code : 215084

Idler

43,40 
Idleraluminum, diameter 86mm, overall width 29mmbore 12mm, Flow wheels, contents: 1 idler pulley item code : 215083

Sprocket 25 teeth

54,50 
Sprocket 25 teeth, made of aluminum, diameter 103mm, overall width 28mm, face width 10mm, bore 12mm, 34mm diameter collarcross-hole M4, Contents: 1 chain, 1 pin screw M4x10 item code : 215086

2-web crawler, black, Scale 1/8

27,00 
2-web crawler, black, Scale 1/8made ​​of fiberglass-reinforced plastic, chain plate is screwed to the connectorschain pins and roller steel chain width 70mm, overall height 22mm, width connectors with bolt 31mm / without bolt 24mm, coil diameter 8mm, height chain plate 7mm, total length 131mm25mm pitchcontent5 chain plates5 sentence connectors, 5 chain pins, 5 reel, 5 circlips, 20 hex bolts and square nuts M2 steelmanual item code : 215081

2-web crawler, traffic gray, Scale 1/8

27,00 
2-web crawlertraffic gray, Scale 1/8made ​​of fiberglass-reinforced plastic, chain plate is screwed to the connectorschain pins and roller steel chain width 70mm, overall height 22mm, width connectors with bolt 31mm / without bolt 24mm, coil diameter 8mm, height chain plate 7mm, total length 131mm25mm pitchcontent5 chain plates5 sentence connectors, 5 chain pins, 5 reel, 5 circlips, 20 hex bolts and square nuts M2 steelmanual item code : 215080

Guide roller holder 1-bar 1:8

19,20 
Guide roller holder 1-bar 1:8, from aluminum turned, 12mm steel pin`s Item code: 295248

Return roller holder 1-bar 1:8

19,20 
Return roller holder 1-bar 1:8, from aluminum turned, 6mm steel pin`s Item code: 295264

Return roller 1-bar 1:8

12,30 
Return roller 1-bar 1:8, from aluminum turned,, drill hole 6mm, diameter 28mm Item code: 295256

2-bar-crawler-track trafficgray, scale 1/14

28,49 
2-bar-crawler-track trafficgray, scale 1/14, from robust plastic with fibre glass reinforced, dowel`s and roll from steel, black oxidised, pitch 15mm, total length 154 mm, width 42 mm, weight ca.38 g, included: 10links, 10dowel`s with snap ring`s and 10 roll`s Item code : 907148

2 bar crawler track black

28,49 
2-bar-crawler-track black, scale 1/14, from robust plastic reinforced with fibre glass, dowel`s and roll from steel, black oxidised, pitch 15mm,  total length 154 mm, width 42 mm, weight ca.38 g, included: 10links, 10dowel`s with snap ring`s and 10 roll`s Item code : 907146

Idler wheel 2-bar, scale 1/14

18,49 
Idler wheel 2-bar, scale 1/14, from aluminum turned, diameter 53mm, width 16mm, drill hole 6mm, with two bushing`s for floating bearing, Quantity: 1 piece Item code : 907150

Track roller 2-bar, scale 1/14

12,99 
Track roller 2-bar, scale 1/14, turned from steel, diameter 17.5mm, width 17.5mm, drill hole 4mm, black oxdised, Quantity: 2 pieces Item code : 907151

Return roller, scale 1/14

12,99 
Return roller, scale 1/14, from steel turned,, drill hole 4mm, diameter 16mm, width 16mm, black oxidised, Quantity: 2 pieces Item code : 907152

Chain wheel, scale 1/14

27,99 
Chain wheel, scale 1/14, from aluminum, 25 teeth, wide tooth system, diameter outside ca. 60 mm, total width ca. 12mm, drill hole 8 mm with transverse hole M4 for fixing, Quantity: 1 piece Item code : 907149

Drive shaft 1-bar 1:8

31,70 
Drive shaft 1-bar 1:8, with bearing flange, pinion 25 tooth modul 1 Item code: 295221

Guid roller 1:8

18,00 
Guid roller 1-bar 1:8, from aluminum turned, diameter 65mm Item code: 295230

Chain wheel, scale 1:8

31,60 
Chain wheel, scale 1:8, from aluminum, 23 teeth, diameter outside ca. 77 mm Item code: 295280

1-bar-crawler-track 1:8 (chain links)

19,20 
1-bar-crawler-track 1:8 (chain links), from robust plastic reinforced with fibre glass, dowel`s from steel with roll from brass, track plate must be bolted down, 5 links have a length from ca. 100 mm, width 57 mm Item code: 295213